Pressure Sensitive Film Applicator Laminator

‍

The standard Pressure Sensitive Film Applicator Laminator (PSA) is equipped with an Unwind Mandrel, a pair of 3" Core Inserts and a pair of clamp collars. It is designed for the purpose of pre-mask application, therefore an Unwind Brake is not necessary for the standard machine.

For powered machines the Unwind Brake controls the web tension of the pre-mask tape between the Unwind and the Application Nip set.

The adjustable pressure nip roller provides protection for pressure sensitive materials. A Load/Run switch controls the opening and closing action while a regulator/gauge provides pressure control. These control components are all located on the operator end of the loading table.

The cylinders controlling the nip roller require a supply of compressed air to operate. The pressure regulator controls the downward pressure the nip roller applies to the material. The gauge offers a view of the operating pressure allowing settings to be repeated after processing different materials.

An optional adjustable compression nip roller style is also available. The minimum gap between the increment and nip rollers can be controlled with this option. Compression limits are adjusted by rotating the stops located on the air cylinders above each end of the nip roller.

The air supplied to the PSA should be 100 psi or greater.

‍

‍Specifications: 12”, 36”, 48”, 60” models

‍

Machine dimension includes tables:

12” unit – 30” wide x 43” deep x 28” height

36” unit – 52” wide x 43” deep x 28 “height

48” unit – 72” wide x 43” deep x 28 “height

60” unit – 84” wide x 45” deep x 30 “height

Standard Features:

Designed for graphics and rigid substrate applications

Rigid steel frame, two rubber coated rolls, air operated nip pressure, foot switch control for hands free operation. Unwind shaft with 3” core.

Maximum sign size:

12” unit – 12” wide x 2” thick

30” unit – 32” wide x 2” thick

48” unit – 50” wide x 2” thick

60” unit – 62” wide x 2” thick

Net machine weight:

12” unit – 150 lbs

30” unit – 220 lbs

48” unit – 250 lbs

60” unit – 320 lbs

Applicator speed:

Variable speed with reverse

From 0 – 80 feet per minute.

Unwind OD of 9.5” inch

Options:

· 5’ loading roller conveyor with

· dual edge guides.

· 5’ unloading roller conveyor.

· Machine stand

· Micrometer stops on air cylinders.

· Powered Rewind for release liner with 3” core.

‍

Increased web speeds available.

Conveyors available with legs for a stand alone unit.

‍

*Full customization available